You are here

Back to top

Optimization of Process Parameter of Pulsed TIG Welding (Paperback)

Optimization of Process Parameter of Pulsed TIG Welding Cover Image
$56.00
Email or call for price

Description


Welding is the fabrication process of joining two different or the same pieces of metal so that bonding takes place at their original boundary surfaces. Weld can be defined as a coalescence of metals produced by heating with or without the application of pressure, and with or without the use of filler material.


Pulsed TIG welding gives phenomenal welding execution on thin sections which builds profitability in production, upgrade weld quality, limit weld expenses, and lift operator effectiveness and this has drawn the consideration of the welding society. The welding current pulsates periodically between a high and low value. Pulsed TIG welding is a variant of TIG welding in welding in which the current pulse between a high and low level.

Pulse welding is welding with a welding current that constantly changes from a high amperage and back again. This allows a welder to weld a thin section of the material. Pulse welding produces deeper penetration without putting much heat into the base metal. A high level of current is called peak current implied for dissolving. Low-level current is also called base current or background perform two fundamental capacity first it keeps up the circular segment with an extremely low heart, second, it permits the solidification of weld pool. The Peak current is set at high amperage of the pulse. This peak current is regularly higher than traditional TIG welding without a pulse. Then the background current setting is the % of the peak current rather than an actual amperage. For example, if you set the peak current at 100 amps and the background current at 40% then the foundation current will be 40 amps.

Pulse welding is prescribed for welding thin metals when the danger burn is higher. If you need an increasingly alluring looking weld, at that point setting the pulse frequency at one or lower and encouraging the filler rod in a state of harmony will give an extremely satisfying impact. If you are welding nonferrous metals like aluminum that have a high heat conductivity at that point pulse helps bring down the general heat produced in the weld. Pulse welding will assist the operator to get deeper penetration minimum HAZ.


Product Details
ISBN: 9786955163212
ISBN-10: 6955163213
Publisher: A R Enterprises
Publication Date: January 4th, 2023
Pages: 252
Language: English